Cisco

Cisco Aironet 1815T Access Point AIR-AP1815T-H-K9

  • Cisco Aironet 1815T Access Point  AIR-AP1815T-H-K9
  • Description
  • Specification

Cisco Aironet 1815T Access Point  AIR-AP1815T-H-K9 


Cisco Aironet 1815T Access Point Specification

Authentication and security
● Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
● 802.1X, RADIUS authentication, authorization, and accounting (AAA)
● 802.11r
● 802.11i
Software
● Cisc o Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 or later
Maximum clients
● Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point



802.11ac
● 2x2 single-user/multiuser MIMO with two spatial streams
● Maximal ratio combining (MRC)
● 20-, 40-, and 80-MHz channels
● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic shift diversity (CSD) support

Ethernet ports
● Authentication with 802.1X or MAC filtered
● Dynamic VLAN or per port
● Traffic locally switched or tunneled back to wireless LAN controller
Integrated antennas
● 2.4 GHz, gain 2 dBi
● 5 GHz, gain 3 dBi


Interfaces
● 1 x 10/100/1000BASE-T autosensing (RJ-45)
● Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port:
â—¦ PoE out provides 802.3af when access point is powered by Cisc o local power supply (AIR-PWR-D=)
Indicators
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)
● Access point (without mounting bracket): 3.5 x 5.5 x 1.25 in (89 x 140 x 31.5 mm)
Weight
● Access point without mounting bracket or any other accessories: 10 oz (280 g)



Environmental
● Operating
◦ Temperature: 32° to 104°F (0° to 40°C)
â—¦ Humidity: 10% to 90% (non-condensing)
◦ Max. altitude: 9843 ft (3,000 m) @ 40°C
● Non-operating (storage and transportation)
◦ Temperature: -22° to 158°F (-30° to 70°C)
â—¦ Humidity: 10% to 90% (non-condensing)
◦ Max. altitude: 15,000 ft (4,500 m) @ 25°C
Integrated antennas
● 2.4 GHz, gain 2 dBi
● 5 GHz, gain 3 dBi


Interfaces
● 1 x 10/100/1000BASE-T autosensing (RJ-45)
● Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port:
â—¦ PoE out provides 802.3af when access point is powered by Cisc o local power supply (AIR-PWR-D=)
Indicators
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions(W x L x H)
● Access point (without mounting bracket): 6 x 4 x 1.5 in (152.4 x 101.6 x 37.7mm)
Weight
● Access point without mounting bracket or any other accessories: 13 oz (365 g)
System
● 512 MB DRAM
● 128 MB flash
● 710 MHz quad-core
Input power requirements
● 44 to 52V DC
Power draw
● 8.5W (no PoE out and no USB)
PoE output
● 802.3af: 15.4W at port
Physical security
● Kensington lock slot

Accessories
● Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports
Warranty
Limited Lifetime Hardware Warranty

Previous: CISCO Aironet 1815i Access point AIR-AP1815I-H-K9C

next: Cisco 2800 Series Access Points AP AIR-AP2802I-H-K9

Top

Cisco network switch,Huawei switch,Cisco Router, Huawei router,NEW used Cisco comparison, Huawei AP WeChat Code

Copyright © 2018 - 2019 Shenzhen Bo-Net Technology Co., Ltd. All Rights Reserved.