CISCO Nexus switch N3K-C3524P-10GX Nexus 3524x, 24 10G Ports

 

 Cis co Nexus 3548-XL and 3524-XL Switches

The Cis co Nexus 3548-XL and 3524-XL Switches are, respectively, Cis co Nexus 3548-X and 3524-X Switches with a faster CPU, running at 2.5 GHz; system memory increased to 16 GB; and bootflash memory increased to 16 GB. These enhancements allow the switches to support the Cis co NX-OS Data Management Engine (DME) model.

Cis co Nexus 3548-XL and 3524-XL Switch

 

The Cis co Nexus 3548-XL and 3524-XL have the following hardware configuration:

*   48 fixed SFP+ ports (1 or 10 Gbps); the Cis co Nexus 3524-XL enables only 24 ports

*   Dual redundant hot-swappable power supplies

*   Four individual redundant hot-swappable fans

*   One 1-PPS timing port, with the RF1.0 and 2.3 QuickConnect connector type

*   One 10/100/1000 management port

*   One RS-232 serial console port

*   Two USB ports

*   Locator LED

*   Locator LED button

Support for both port-side exhaust and port-side intake airflow schemes is available.Port-side exhaust airflow is useful when the port side of the switch sits on a hot aisle and the power supply side sits on a cold aisle.Port-side intake airflow is useful when the power supply side of the switch sits on a hot aisle and the port side sits on a cold aisle.

Colored handles on each fan or power supply clearly indicate the airflow direction, as shown in Figures 1 and 2.

Figure 1.    Cis co Nexus 3548-XL and 3524-XL with blue handles indicating port-side exhaust airflow

 

Figure 2.    Cis co Nexus 3548-XL and 3524-XL with red handles indicating port-side intake airflow

 

 

Part number	Description
N3K-C3548P-XL	Nexus 3548-XL Switch, 48 SFP+
N3K-C3524P-XL	Nexus 3524-XL Switch, 24 SFP+
N3K-C3548P-10GX	Nexus 3548-X Switch, 48 SFP+
N3K-C3524P-10GX	Nexus 3524-X Switch, 24 SFP+

Specification	Cis co Nexus 3524-X
Physical	24 fixed SFP+ ports (1 or 10 Gbps); expandable to 48 ports Dual redundant hot-swappable power supplies Four individual redundant hot-swappable fans One 1-PPS timing port, with the RF1.0/2.3 QuickConnect connector type Two 10/100/1000-Mbps management ports One RS-232 serial console port One USB port Locator LED Locator LED button
Performance	480-Gbps switching capacity Forwarding rate of 360 mpps Line-rate traffic throughput (both Layer 2 and 3) on all ports Configurable MTUs of up to 9216 bytes (jumbo frames)
Typical operating power	102W
Maximum power	193W

 

	Mode	Normal mode
Hardware tables and scalability       Previous： Used CISCO WS-C4948-10GE-S 4948-10GE 48 Port Gigabit +10GB S... next： High quality & used new PVDM3-192 Router 192-channel Voice D... Phone Contact us