Английский
Русский
Return list
Huawei
Huawei Wireless Outdoor Access Point AP8050DN-S Dual-Band With Built-in Bluetoot
- Description
- Specification
Huawei Wireless Outdoor Access Point AP8050DN-S Dual-Band With Wireless Bridge And Built-in Bluetoot
AP8050DN-S Access Point
Huawei AP8050DN-S is a dual-band wireless access point (AP) that supports 802.11ac Wave 2, 2 x 2 MU-MIMO, and two spatial streams. The AP is physically hardened and offers enhanced outdoor coverage performance. It can operate at both the 2.4 GHz and 5 GHz frequencies and support the wireless bridge function. It has a built-in Bluetooth and complies with IEEE 802.11a/b/g/n/ac. Its ability to operate at both 2.4 GHz and 5 GHz allows more access and provides gigabit-level wireless outdoor bandwidth. It provides comprehensive service support capabilities and features high reliability, high security, simple network deployment, automatic AC discovery and configuration, and real-time management and maintenance, which meet outdoor network requirements. It is applicable to coverage scenarios (for example, densely-populated stadiums, squares, pedestrian streets, and amusement parks) and bridging scenarios (for example, wireless harbors, data backhaul, video surveillance, and train-to-ground backhaul).
•802.11ac Wave 2 compliance, MU-MIMO, delivering services simultaneously on 2.4 GHz and 5 GHz frequencies, peak rate of 400 Mbit/s at 2.4 GHz and 867 Mbit/s at 5 GHz, and 1.267 Gbit/s for the device
•Built-in 5 kA surge protectors; no external surge protection device required, simplifying installation and reducing costs
•High-grade metal materials and an overall heat dissipation design, working temperature ranging from –40°C to +65°C, 6 kA or 6 kV surge protection capability on an Ethernet interface, and IP68 waterproof and dustproof, meeting industry-level requirements
•Built-in Bluetooth to extend Bluetooth-based applications
•Support for the Fat, Fit, and cloud modes
•Support for cloud-based management and O&M of APs and services through SDN controller, reducing O&M costs
1.GE0/PoE: 10/100/1000M port that connects to the wired Ethernet and supports PoE input.
2.Device ground screw: Connects the device to a ground cable.
3.GE1: 10/100/1000M port that connects to the wired Ethernet.
4.SFP: Optical port that supports the 100M/1000M optical module.
5.CONSOLE: Connects to a maintenance terminal for AP configuration and management.
6.Security slot: Connects to a security lock.
7.Default: Restores factory settings and restarts the device when you hold down the button more than 3 seconds.
Previous： Huawei Remote Units R230D Support POE Power Supply Used For ...
next： Huawei AP6052DN Indoor Access Point 802.11ac Wave2 Wireless ...