HUAWEI S5700-52X-LI-48CS-AC 48 Port Gigabit CSFP Switch, 4 10GE SFP+ Uplink Port
- Description
- Specification
1 |
Forty-four 100/1000BASE-X CSFP ports Applicable modules: · FE optical module · GE optical module · GE-CWDM optical module · CSFP optical module · GE copper module (works at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s) NOTE: · When all the ports have CSFP optical modules installed, each port functions as two ports. The switch has a total of 44 ports in this case. · When all the ports have SFP optical modules installed, each port functions as one port. The switch has a total of 22 ports. |
2 |
Four combo ports (10/100/1000BASE-T + 100/1000BASE-X) Modules applicable to combo optical ports: · FE optical module · GE optical module · GE-CWDM optical module · CSFP optical module NOTE: The four combo ports (numbered 45, 46, 47, and 48) on a CSFP switch include four electrical ports and two optical ports. The two optical ports can function as four optical modules when they have Compact Small Form-Factor Pluggable (CSFP) optical modules installed. When the two optical ports have SFP optical modules installed, the electrical ports 45 and 48 can be used normally. |
3 |
Four 10GE SFP+ ports Applicable modules and cables: · GE optical module · GE-CWDM optical module · GE-DWDM optical module · GE copper module (only 1000 Mbit/s supported) · 10GE SFP+ optical module · 10GE-CWDM optical module (applicable in V200R005C00 and later versions) · 1 m, 3 m, and 10 m SFP+ high-speed copper cables · 5 m SFP+ high-speed copper cable (applicable in V200R009C00 and later versions) · 3 m and 10 m AOC cables · 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, supported in V200R011C10 and later versions) |
4 |
One mini USB port |
5 |
One console port |
6 |
One USB port |
7 |
AC socket NOTE: It is used with an AC power cable. |
8 |
Jack for AC power cable locking strap NOTE: The AC power cable locking strap is not delivered with the switch. |
9 |
Ground screw NOTE: It is used with a ground cable. |
10 |
RPS socket NOTE: It is used with an RPS cable, which is not hot swappable. |
Item |
Description |
Memory (RAM) |
256 MB |
Flash |
200 MB |
Service port surge protection |
Combo electrical port: ±2 kV in common mode |
Power supply surge protection |
±6 kV in differential mode, ±6 kV in common mode |
Dimensions (H x W x D) |
43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.7 in.) |
Weight (with packaging) |
3.4 kg (7.5 lb) |
Stack ports |
Four uplink 10GE SFP+ ports |
RTC |
Supported |
RPS |
Supported |
PoE |
Not supported |
Rated voltage range |
100 V AC to 240 V AC, 50/60 Hz |
Maximum voltage range |
90 V AC to 264 V AC, 47 Hz to 63 Hz |
Maximum power consumption (100% throughput, full speed of fans) |
79.93 W |
Typical power consumption (30% of traffic load) · Tested according to ATIS standard · EEE enabled · No PoE power consumption |
69.17 W |
Operating temperature |
0°C to 45°C (32°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.) NOTE: When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
Storage temperature |
-40°C to +70°C (-40°F to +158°F) |
Noise under normal temperature (27°C, sound power) |
< 67.3 dB(A) |
Relative humidity |
5% to 95%, noncondensing |
Operating altitude |
0-5000 m (0-16404 ft.) |
Certification |
· EMC certification · Safety certification · Manufacturing certification |
Part number |
02357823 |
Previous: Huawei S5700-28X-LI-DC S5700 Switch 24 Port Gigabit + 4 10GE...
next: Huawei S5700-52C-PWR-EI S5700 Switch 48 Port Gigabit POE Net...