Huawei S5720-14X-PWH-SI-AC 8 PoE+ Gigabit Port 2x 10GE SFP+ Ports Layer 3 Switch-HUAWEI-Cisco network switch,Huawei switch,Cisco Router, Huawei router,NEW used Cisco comparison, Huawei AP

Huawei S5720-14X-PWH-SI-AC 8 PoE+ Gigabit Port 2x 10GE SFP+ Ports Layer 3 Switch

1.Eight PoE+ 10/100/1000BASE-T ports	2.Four PoE++ 100M/1000M/2.5GE BASE-T ports (MultiGE port)
3.Two 10GE SFP+ ports Applicable modules and cables: * GE optical module * GE-CWDM optical module * GE-DWDM optical module * GE copper module (only 1000 Mbit/s supported) * 10GE SFP+ optical module (OSXD22N00 not supported) * 10GE-CWDM optical module * 10GE-DWDM optical module * 1 m, 3 m, 5 m, and 10 m SFP+ high-speed copper cables * 3 m and 10 m AOC cables * 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, supported in V200R011C10 and later versions)	4.One console port
5.One ETH management port	6.One USB port
7.Ground screw	8.AC socket

Item	Description
Memory (RAM)	1 GB
Flash	512 MB in total. To view the available flash memory size, run the display version command.
Power supply surge protection	Â±6 kV in differential mode, Â±6 kV in common mode
Dimensions (H x W x D)	43.6 mm x 442.0 mm x 310.0 mm (1.72 in. x 17.4 in. x 12.2 in.)
Weight (with packaging)	5.9 kg (13.01 lb)
Stack ports	First eight GE electrical ports 10GE SFP+ ports (V200R010C00 and later versions)
RTC	Supported
RPS	Not supported
PoE	Supported
Rated voltage range	100 V AC to 240 V AC, 50/60 Hz
Maximum voltage range	90 V AC to 264 V AC, 47 Hz to 63 Hz
Maximum power consumption (100% throughput, full speed of fans)	Not providing the PoE function: 52 W 100% PoE loads: 422 W (system power consumption: 52 W, PoE: 370 W)
Typical power consumption (30% of traffic load) Tested according to ATIS standard EEE enabled No PoE power consumption	44.94 W