Huawei S5730-44C-HI-24S 24 Ports GE SFP Switch S5730 10GE uplink Ports Switch-HUAWEI-Cisco network switch,Huawei switch,Cisco Router, Huawei router,NEW used Cisco comparison, Huawei AP

Huawei S5730-44C-HI-24S 24 Ports GE SFP Switch S5730 10GE uplink Ports Switch

Description
Specification

S5730-HI Series Switches

Huawei S5730-HI series switches are next-generation IDN-ready fixed switches that provide fixed all-gigabit access ports, 10 GE uplink ports, and extended card slots for expansion of uplink ports.

S5730-HI series switches provide native AC capabilities and can manage 1K APs. They provide a free mobility function to ensure a consistent user experience and are VXLAN capable to implement network virtualization. S5730-HI series switches also provide built-in security probes and support abnormal traffic detection, Encrypted Communications Analytics (ECA), and network-wide threat deception. S5730-HI series switches are ideal for the aggregation and access layers of medium- and large-sized campus networks and the core layer of campus branch networks and small-sized campus networks.

1	Sixteen 100/1000BASE-X ports Applicable modules: FE optical module GE optical module GE-CWDM optical module GE copper module (works at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s) GE-CWDM optical module (used only in the OADM scenario)	2	Eight combo ports (10/100/1000BASE-T + 100/1000BASE-X) Modules applicable to combo optical ports: FE optical module GE optical module GE-CWDM optical module GE-CWDM optical module (used only in the OADM scenario)
3	Four 10GE SFP+ ports Applicable modules and cables: GE optical module GE-CWDM optical module GE-DWDM optical module GE copper module 10GE SFP+ optical module (OSXD22N00 not supported) 10GE-CWDM optical module 10GE-DWDM optical module 1 m, 3 m, 5 m, and 10 m SFP+ high-speed copper cables 3 m and 10 m AOC cables 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking)	4	PNP button NOTICE: To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.
5	One console port	6	One ETH management port
7	One USB port	8	Ground screw NOTE: It is used with a ground cable.
9	ESN label NOTE: You can draw it out to view the ESN and MAC address of the switch.	10	Rear card slot 1 NOTE: Cards supported: ES5D21Q02Q00 ES5D21X08T00 ES5D21X08S00
11	Rear card slot 2 NOTE: This slot is reserved for future use.	12	Power module slot 2 NOTE: Applicable power modules: 150 W AC power module 150 W DC power module
13	Power module slot 1 NOTE: Applicable power modules: 150 W AC power module 150 W DC power module	-	-

Item	S5730-44C-HI S5730-44C-PWH-HI	S5730-44C-HI-24S	S5730-60C-HI S5730-60C-PWH-HI	S5730-60C-HI-48S	S5730-68C-HI S5730-68C-PWH-HI	S5730-68C-HI-48S
Switching capacity	758Gbps/7.58Tbps	758Gbps/7.58Tbps	758Gbps/7.58Tbps	758Gbps/7.58Tbps	758Gbps/7.58Tbps	758Gbps/7.58Tbps
Fixed port	24 10/100/1000Base-T Ethernet ports,4 10 Gig SFP+	24 Gig SFP, 8 of which are dual-purpose 10/100/1000Base-T or SFP portsï¼Œ4 10 Gig SFP+	48 10/100/1000Base-T Ethernet ports,4 10 Gig SFP+	48 Gig SFP, 4 10 Gig SFP+	48 10/100/1000Base-T Ethernet ports,4 10 Gig SFP+	48 Gig SFP, 4 10 Gig SFP+
Wireless Services	AP access control, AP domain management, and AP configuration template management Radio channel management, unified static configuration, and dynamic centralized management WLAN basic services, QoS, security, and user management CAPWAP, tag/terminal location, and spectrum analysis
iPCA	Directly coloring service packets to collect real-time statistics on the number of lost packets and packet loss ratio Collection of statistics on the number of lost packets and packet loss ratio at network and device levels
Super Virtual Fabric (SVF)	Works as the parent node to vertically virtualize downlink switches and APs as one device for management A two-layer client architecture is supported Third-party devices are allowed between SVF parent and clients
VxLAN	Supports VXLAN L2 and L3 gateways Centralized and distributed gateway BGP-EVPN Configured through the NETCONF protocol
Interoperability	VBST (compatible with PVST/PVST+/RPVST) LNP (similar to DTP) VCMP (similar to VTP)

Item	Description
Memory (RAM)	2 GB
Flash	1 GB in total. To view the available flash memory size, run the display version command.
Dimensions (W x D x H)	442.0 mm x 420.0 mm x 44.4 mm (17.4 in. x 16.5 in. x 1.74 in.)
Weight (including packaging materials)	9.72 kg (21.43 lb)
Stack ports	10GE SFP+ ports on the front panel, or 10GE ports or 40GE QSFP+ ports on the rear card
RTC	Supported
RPS	Not supported
PoE	Not supported
Rated voltage range	100 V AC to 240 V AC, 50/60 Hz -48 V DC to -60 V DC
Maximum voltage range	90 V AC to 264 V AC, 47 Hz to 63 Hz -36 V DC to -72 V DC
Maximum power consumption (100% throughput, full speed of fans)	78 W (without card)
Typical power consumption (30% of traffic load) Tested according to ATIS standard EEE enabled No PoE power consumption	64 W (without card)

Previous： Huawei S5730-36C-PWH-HI S5730 Switch 24 Port Gigabit Etherne...

next： Huawei S5730-68C-PWR-SI-AC S5730 48 Port Gigabit Layer 3 POE...