Huawei CloudEngine S5735S-L12P4S-A 12 Port SFP POE Switch S5730 Switch 4 SFP
- Description
- Specification
1 |
Twelve PoE+ 10/100/1000BASE-T ports |
2 |
Four 1000BASE-X ports
Applicable modules:
|
3 |
One console port |
4 |
One ETH management port |
5 |
One USB port |
6 |
One PNP button
NOTICE:
To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button. |
7 |
Ground screw
NOTE:
|
8 |
Jack for AC power cable locking strap
NOTE:
The AC power cable locking strap is not delivered with the switch.
|
9 |
AC socket
NOTE:
It is used with an AC power cable. |
- |
- |
Item |
Description |
---|---|
Memory (RAM) |
1 GB |
Flash |
512 MB in total. To view the available flash memory size, run the display version command. |
Mean time between failures (MTBF) |
85.52 years |
Mean time to repair (MTTR) |
2 hours |
Availability |
> 0.99999 |
Service port surge protection |
Common mode: ±7 kV |
Power supply surge protection |
±6 kV in differential mode, ±6 kV in common mode |
Dimensions (H x W x D) |
|
Weight (with packaging) |
4.24 kg (9.35 lb) |
Stack ports |
Any 10/100/1000BASE-T ports or 1000BASE-X ports (applicable in V200R019C10 and later versions) |
RTC |
Not supported |
RPS |
Not supported |
PoE |
Supported |
Rated voltage range |
|
Maximum voltage range |
|
Maximum power consumption (100% throughput, full speed of fans) |
|
Typical power consumption (30% of traffic load)
|
38 W |
Previous: Huawei S5735S-L48T4S-A S5735S 48 Port Gigabit Ethernet 4 SFP...
next: Huawei S5735S-L12T4S-A 12 Port Gigabit 4 SFP Port Layer 3 Ma...