Huawei S5735S-S32ST4X-A 24 Port SFP 8 10/100/1000BASE-T Port 4 10G SFP+ Switch-HUAWEI-Cisco network switch,Huawei switch,Cisco Router, Huawei router,NEW used Cisco comparison, Huawei AP

Huawei S5735S-S32ST4X-A 24 Port SFP 8 10/100/1000BASE-T Port 4 10G SFP+ Switch

	Twenty-four 100/1000BASE-X ports Applicable modules: FE optical module GE optical module (maximum transmission distance â‰¤ 40 km) GE copper module (works at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s)	2	Eight 10/100/1000BASE-T ports
3	Four 10GE SFP+ ports Applicable modules and cables: GE optical module GE-CWDM optical module GE-DWDM optical module GE copper module (100M/1000M auto-sensing) 10GE SFP+ optical module (OSXD22N00 not supported) 10GE-CWDM optical module 10GE-DWDM optical module 1 m and 3 m SFP+ high-speed copper cables 3 m and 10 m SFP+ AOC cables 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, applicable in V200R019C10 and later versions)	4	One console port
5	One ETH management port	6	One USB port
7	One PNP button NOTICE: To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.	8	Ground screw NOTE: It is used with a ground cable.
9	Power module slot 1 NOTE: Applicable power module: 60 W AC Power Module (PAC60S12-AR) 1000 W DC Power Module (PDC1000S12-DB)	10	Power module slot 2 NOTE: Applicable power module: 60 W AC Power Module (PAC60S12-AR) 1000 W DC Power Module (PDC1000S12-DB)

Item	Description
Memory (RAM)	1 GB
Flash	512 MB in total. To view the available flash memory size, run the display version command.
Power supply surge protection	Using AC power modules: Â±6 kV in differential mode, Â±6 kV in common mode Using DC power modules: Â±2 kV in differential mode, Â±4 kV in common mode
Dimensions (H x W x D)	Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 43.6 mm x 442.0 mm x 444.2 mm (1.72 in. x 17.4 in. x 17.49 in.)
Weight (with packaging)	8.15 kg (17.97 lb)
Stack ports	Any 10/100/1000BASE-T ports, 100/1000BASE-X ports, or 10GE SFP+ ports (applicable in V200R019C10 and later versions)
RTC	Supported
RPS	Not supported
PoE	Not supported
Rated voltage range	AC input: 100 V AC to 240 V AC, 50/60 Hz High-Voltage DC input: 240 V DC DC input: -48 V DC to -60 V DC
Maximum voltage range	AC input: 90 V AC to 264 V AC, 47 Hz to 63 Hz High-Voltage DC input: 190 V DC to 290 V DC DC input: -38.4 V DC to -72 V DC
Maximum power consumption (100% throughput, full speed of fans)	66 W
Typical power consumption (30% of traffic load) Tested according to ATIS standard EEE enabled No PoE power consumption	47 W