HUAWEI

Huawei S5730 Series S5735S-L24P4X-A 24 Port Gigabit POE+ Switch 10GE Uplink Port

  • Huawei S5730 Series S5735S-L24P4X-A 24 Port Gigabit POE+ Switch 10GE Uplink Port
  • Description
  • Specification

S5735S-L24P4X-A
 24 x 10/100/1000Base-T ports, 4 x 10 GE SFP+ ports  AC power supply
POE  Forwarding performance: 96 Mpps  Switching capacity: 128 Gbps/336 Gbps

1

Twenty-four PoE+ 10/100/1000BASE-T ports

2

Four 10GE SFP+ ports

Applicable modules and cables:
  • GE optical module
  • GE-CWDM optical module
  • GE-DWDM optical module
  • GE copper module (100M/1000M auto-sensing)
  • 10GE SFP+ optical module (OSXD22N00 not supported)
  • 10GE-CWDM optical module
  • 10GE-DWDM optical module
  • 1 m and 3 m SFP+ high-speed copper cables
  • 3 m and 10 m SFP+ AOC cables
  • 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, applicable in V200R019C10 and later versions)

3

One console port

4

One ETH management port

5

One USB port

6

One PNP button

NOTICE:

To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.

7

Ground screw

NOTE:
It is used with a ground cable.

8

Jack for AC power cable locking strap

NOTE:
The AC power cable locking strap is not delivered with the switch.

9

AC socket

NOTE:

It is used with an AC power cable.

-

-

Item

Description

Memory (RAM)

1 GB

Flash

512 MB in total. To view the available flash memory size, run the display version command.

Dimensions (H x W x D)

  • Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.7 in.)
  • Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.)

Weight (with packaging)

4.31 kg (9.5 lb)

Stack ports

Any 10/100/1000BASE-T ports or 10GE SFP+ ports (applicable in V200R019C10 and later versions)

RTC

Not supported

RPS

Not supported

PoE

Supported

Rated voltage range

  • AC input: 100 V AC to 240 V AC, 50/60 Hz
  • High-Voltage DC input: 240 V DC

Maximum voltage range

  • AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz
  • High-Voltage DC input: 190 V DC to 290 V DC

Maximum power consumption (100% throughput, full speed of fans)

  • Not providing the PoE function: 56 W
  • 100% PoE loads: 458 W (PoE: 380 W)
Typical power consumption (30% of traffic load)
  • Tested according to ATIS standard
  • EEE enabled
  • No PoE power consumption

43 W





Previous: Huawei S5735 S5735S-L24T4X-A 24 Ports Gigabit Switch 4 x 10 ...

next: Huawei S5735S-L48T4X-A 48 Ports Gigabit 4 x 10 GE SFP+ ports...

Top

Cisco network switch,Huawei switch,Cisco Router, Huawei router,NEW used Cisco comparison, Huawei AP WeChat Code

Copyright © 2018 - 2019 Shenzhen Bo-Net Technology Co., Ltd. All Rights Reserved.