Huawei S5735S Switch S5735S- L32ST4X-A 32 Port Gigabit Ethernet 4x 10G SFP+ Port-HUAWEI-Cisco network switch,Huawei switch,Cisco Router, Huawei router,NEW used Cisco comparison, Huawei AP

HUAWEI

Huawei S5735S Switch S5735S- L32ST4X-A 32 Port Gigabit Ethernet 4x 10G SFP+ Port

Description
Specification

24 x GE SFP ports, 8 x 10/100/1000Base-T ports, 4 x 10 GE SFP+ ports
AC power supply
Forwarding performance: 108 Mpps
Switching capacity: 144 Gbps/432 Gbps

1	Twenty-four 100/1000BASE-X ports Applicable modules: FE optical module GE optical module (maximum transmission distance â‰¤ 40 km) GE copper module (works at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s)	2	Eight 10/100/1000BASE-T ports
3	Four 10GE SFP+ ports Applicable modules and cables: GE optical module GE-CWDM optical module GE-DWDM optical module GE copper module (100M/1000M auto-sensing) 10GE SFP+ optical module (OSXD22N00 not supported) 10GE-CWDM optical module 10GE-DWDM optical module 1 m and 3 m SFP+ high-speed copper cables 3 m and 10 m SFP+ AOC cables 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, applicable in V200R019C10 and later versions)	4	One console port
5	One ETH management port	6	One USB port
7	One PNP button NOTICE: To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.	8	Ground screw NOTE: It is used with a ground cable.
9	Jack for AC power cable locking strap NOTE: The AC power cable locking strap is not delivered with the switch.	10	AC socket NOTE: It is used with an AC power cable.

Item	Description
Memory (RAM)	1 GB
Flash	512 MB in total. To view the available flash memory size, run the display version command.
Service port surge protection	Common mode: Â±7 kV
Power supply surge protection	Â±6 kV in differential mode, Â±6 kV in common mode
Dimensions (H x W x D)	Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.7 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.)
Weight (with packaging)	4.31 kg (9.5 lb)
Stack ports	Any 10/100/1000BASE-T ports, 100/1000BASE-X ports, or 10GE SFP+ ports (applicable in V200R019C10 and later versions)
RTC	Not supported
RPS	Not supported
PoE	Not supported
Rated voltage range	AC input: 100 V AC to 240 V AC, 50/60 Hz High-Voltage DC input: 240 V DC
Maximum voltage range	AC input: 90 V AC to 264 V AC, 47 Hz to 63 Hz High-Voltage DC input: 190 V DC to 290 V DC
Maximum power consumption (100% throughput, full speed of fans)	65 W
Typical power consumption (30% of traffic load) Tested according to ATIS standard EEE enabled No PoE power consumption	46 W

Previous： H3C S6520-SI LS-6520-24S-SI series of new generation 10G mul...

next： Huawei S5735S-L48FT4S-A 24 Port Fast Ethernet 24 Gigabit 4 S...