Английский
Русский
CISCO 3850 WS-C3850-48T-E 48-Port Gigabit Ethernet Data IP Services Switch
- Description
- Specification
CISCO WS-C3850-48T-E 3850 48 Port Data IP Services Switch
The C3850-NM-4-10G module is supported only on the 48-port Gigabit Ethernet models or on the 12-port or higher 10 Gigabit Ethernet models. The C3850-NM-8x10G and C3850-NM-2x40G modules are supported on the 24-port and 48-port multigigabit switches and also on the 24-port 10G SFP+ switch model. The C3850-NM-4-1G and C3850-NM-2-10G modules are not supported on the 12-port and 24-port SFP+ models.
|
WS-C3850-48T-E |
Stackable 48 10/100/1000 Ethernet ports, with 350WAC power supply 1 RU, IP Services feature set |
|
WS-C3750X-48T-E |
network switch 3750X 48 Port Data IP Services |
WS-C3850-48T-E |
CIS CO network switch 3850 48 Port Data IP Services |
| PRODUCT DETAILS | |
|---|---|
| Device Type | Switch - 48 ports - L3 - Managed - stackable |
| Enclosure Type | Desktop, rack-mountable 1U |
| Ports | 48 x 10/100/1000 (PoE+) |
| Power Over Ethernet (PoE) | PoE+ |
| PoE Budget | 435 W |
| Performance |
Switching capacity : 176 Gbps Stacking bandwidth : 480 Gbps |
| Capacity |
IPv4 routes : 24000 NetFlow entries : 48000 Switched virtual interfaces (SVIs) : 1000 |
| MAC Address Table Size | 32000 entries |
| Jumbo Frame Support | 9198 |
| Routing Protocol | RIP-1, RIP-2, EIGRP, RIPng |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, SSH, CLI |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at |
| Power | AC 120/230 V ( 50/60 Hz ) |
| Power Redundancy | Optional |
| Dimensions (WxDxH) | 44.5 cm x 45 cm x 4.45 cm |
| Weight | 7.9 kg |
Previous： CISCO WS-C3850-48U-L 48-Port GigE UPOE switch managed networ...
next： WS-C3850-12X48U-S 48 10/100/1000 with 12 100Mbps/1/2.5/5/10 ...