Английский
Русский
CISCO Aironet 2700i Access Point CISCO AIR-AP2702I-UXK9 Indoor Wireless POE Ac
- Description
- Specification
CISCO Aironet 2700i Access Point CISCO AIR-AP2702I-UXK9 Indoor Wireless POE Access Point 802.11ac
Cis co Aironet 2700i Access Point: Indoor environments, with internal antennas, Universal Regulatory Domain (UX)
1. AIR-AP2702I-UXK9: Dual-band, controller-based 802.11a/g/n/ac
2.AIR-AP2702I-UXK9C: Dual-band, controller-based 802.11a/g/n/ac (Configurable)
3.AIR-AP2702I-UXK910: Eco-pack (dual-band 802.11a/g/n/ac) 10 quantity access points
4. AIRAP2702I-UXK910C: Eco-pack (dual-band 802.11a/g/n/ac) 10 quantity access points (Configurable)
|
Software |
CISCO Unified Wireless Network Software Release 7.6MR2 or later |
|||||||
|
Supported wireless LAN controllers |
1. CISCO 2500 Series Wireless Controllers, CISCO Wireless Controller Module for ISR G2, CISCO Wireless Services Module 2 (WiSM2) for Cat® 6500 Series Switches, CISCO 5500 Series Wireless Controllers, CISCO Flex® 7500 Series Wireless Controllers, CISCO 8500 Series Wireless Controllers, CISCO Virtual Wireless Controller
2. CISCO 5760 Wireless LAN Controller, CISCO Cat 3850 Series Switches, CISCO Cat 3650 Series Switches
|
|||||||
|
802.11n version 2.0 (and related) capabilities |
1. 3x4 MIMO with three spatial streams
2. Maximal ratio combining (MRC)
3. 802.11n and 802.11a/g beamforming
4. 20- and 40-MHz channels
5. PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
6. Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
7. 802.11 dynamic frequency selection (DFS)
8. Cyclic shift diversity (CSD) support
|
|||||||
|
802.11ac Wave 1 capabilities |
1. 3x4 MIMO with three spatial streams
2. MRC
3. 802.11ac beamforming
4. 20-, 40-, and 80-MHz channels
5. PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
6. Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
7. 802.11 DFS
8. CSD support
|
|||||||
|
Integrated antenna |
1. 2.4 GHz, gain 4 dBi, internal omni, horizontal beamwidth 360°
2. 5 GHz, gain 4 dBi, internal omni, horizontal beamwidth 360°
|
|||||||
|
External antenna (sold separately) |
1. Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
2. CISCO offers the industry's broadest selection ofantennas, delivering optimal coverage for a variety of deployment scenarios
|
|||||||
|
Interfaces |
1. 2x10/100/1000BASE-T autosensing (RJ-45)
2. Management console port (RJ-45)
|
|||||||
|
Indicators |
1. Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
|
|||||||
|
Dimensions (W x L x H) |
1. Access point (without mounting bracket): 8.69 x 8.69 x 1.99 in. (22.1 x 22.1 x 5.1 cm)
|
|||||||
|
Weight |
1. 2.2 lb (1.0 kg)
|
|||||||
Previous： AIR-CAP2702I-H-K9 Access Point wireless AP With Antenna
next： 100% New C1111-8PLTELA ISR 1100 8P Dual GE Router w/ LTE Adv...