Cisco Aironet 1840 Series Access Points AIR-AP1840I-H-K9
- Description
- Specification
Cisco Aironet 1840 Series Access Points AIR-AP1840I-H-K9
Item |
Specification |
|||||||||||||||||||||||||
Part numbers |
Cisco Aironet 1840 Series Access Point: Indoor environments, with internal antennas
â— AIR-AP1840I-x-K9: Aironet 1840
Cisco Aironet 1840 Series Access Point with Mobility Express: Indoor environments, with internal antennas
â— AIR-AP1840I-x-K9C: Aironet 1840 Series with Mobility Express
Regulatory domains: (x = regulatory domain) Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance. Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List. Cisco Wireless LAN Services
â— AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service
â— AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service
â— AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service
|
|||||||||||||||||||||||||
Software |
â— Cisco Unified Wireless Network Software Release 8.8 MR2 or later
◠Cisco IOS ® XE Software Release 16.12 or later
|
|||||||||||||||||||||||||
Supported wireless LAN controllers |
â— Cisco Catalyst 9800 Wireless Controllers
â— Cisco 3500, 5520 and 8540 Series Wireless Controllers, Cisco Virtual Wireless Controller
â— Cisco Mobility Express
|
|||||||||||||||||||||||||
802.11n version 2.0 (and related) capabilities |
â— 5 GHz, 4x4 MIMO with four spatial streams
â— 2.4 GHz, 2x2 MIMO with two spatial streams
â— Maximal Ratio Combining (MRC)
â— 802.11n and 802.11a/g beamforming
â— 20 and 40 MHz channels
â— PHY data rates up to 744 Mbps (40 MHz with 5 GHz and 20MHz with 2.4GHz)
â— Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
â— 802.11 Dynamic Frequency Selection (DFS)
â— Cyclic Shift Diversity (CSD) support
|
|||||||||||||||||||||||||
802.11ac |
â— 4x4 DL MU-MIMO with four spatial streams
â— MRC
â— 802.11ac beamforming
â— 20, 40, 80 MHz channels
â— PHY data rates up to 1733 Mbps (80MHz with 5 GHz)
â— Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
â— 802.11 DFS
â— CSD support
|
|||||||||||||||||||||||||
Integrated antenna |
â— 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
â— 5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth
|
|||||||||||||||||||||||||
Interfaces |
â— 2 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
â— Management console port (RJ-45)
â— USB 2.0 (enabled via future software)
|
|||||||||||||||||||||||||
Indicators |
â— Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
|
|||||||||||||||||||||||||
â— Access point (without mounting brackets): AIR-AP1840I: 7 x 7 x 1.5 in
|
||||||||||||||||||||||||||
Weight |
Cisco AIR-AP1840I
â— 0.94 lb (0.43 kg)
|
|||||||||||||||||||||||||
Input power requirements |
◠802.3at PoE+, Cisco Universal PoE (Cisco UPOE ®)
â— Cisco power injector, AIR-PWRINJ6=
â— 802.3af PoE
â— Cisco power injector, AIR-PWRINJ5= (note: this injector only supports 802.3af)
Note: When 802.3af PoE is the source of power, then USB port will be off |
|||||||||||||||||||||||||
Power draw |
Cisco AIR-AP1840I
â— 13.2W at the PSE (12.1W at the PD) with all features enabled except for the USB port
â— 17.8W at the PSE (16.0W at the PD) with the USB port enabled
|
|||||||||||||||||||||||||
Environmental |
Previous: Cisco original Access Points AIR-AP1832I-H-K9 next: CISCO Aironet 1815i Access point AIR-AP1815I-H-K9C |