UniFi AC In-Wall AP indoor 802.11ac dual-band Wi-Fi Access Point UAP-AC-IW

• 
• 
• 
• 

• Description
• Specification

UniFi AC In-Wall AP indoor 802.11ac dual-band Wi-Fi Access Point UAP-AC-IW

Easier Than You Think
Ideal for new and retrofit installations, the UniFi® AC In-Wall is designed to convert an Ethernet wall jack into a dual-band
802.11ac Wi-Fi access point with two Gigabit Ethernet ports.

Scalable. Dedicated Wi-Fi per room
Easy Setup, Monitoring, and Control
Fast. Two radios, 802.11ac

The Power of PoE
Turn existing wiring into per-room Wi-Fi with the UniFi PoE Switch series.*
* Requires Cat5e or higher

UniFi PoE Switch
UniFi In–Wall AP Deployments

Versatile Data and PoE Outpu

* An Ethernet wall jack becomes an access point, a gigabit switch, and a PoE power source.

* Wire a workstation and power a VoIP phone. Or power a US-8 for even more Ethernet ports.

UAP-AC-IW
Dimensions	139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01")
Weight	200 g (6.43 oz)
Networking Interface	(3) 10/100/1000 Ethernet Ports
Buttons	Reset
Power Method	802.3at PoE+ Supported
Power Supply	UniFi PoE Switch (Not Included)
Power Save	Supported
PoE Out	48V Pass-Through (Pins 1, 2+; 3, 6-)
Maximum Power Consumption	7W
Maximum TX Power 2.4 GHz 5 GHz	20 dBm 20 dBm
Antennas 2.4 GHz 5 GHz	(1) Dual-Band Antenna, Single-Polarity 1 dBi 2 dBi
Wi-Fi Standards	802.11 a/b/g/n/ac
Wireless Security	WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID	Up to Four per Radio
Mounting	1-Gang Electrical Wall Box (Not Included)
Operating Temperature	-10 to 50° C (14 to 122° F)
Operating Humidity	5 to 95% Noncondensing
Certifications	CE, FCC, IC
Advanced Traffic Management
VLAN	802.1Q
Advanced QoS	Per-User Rate Limiting
Guest Traffic Isolation	Supported
WMM	Voice, Video, Best Effort, and Background
Concurrent Clients	250+

Previous： UniFi AC In-Wall UAP-AC-IW-PRO 802.11ac Wi-Fi Two Gigabit P...

next： UniFi nanoHD 4x4 MU-MIMO Indoor Small Access Point UAP-nanoH...