Huawei S5735S-L S5735S-L24P4S-A 24 Ports POE Gigabit Switch With 4x GE SFP ports-HUAWEI-Cisco network switch,Huawei switch,Cisco Router, Huawei router,NEW used Cisco comparison, Huawei AP

Huawei S5735S-L S5735S-L24P4S-A 24 Ports POE Gigabit Switch With 4x GE SFP ports

Description
Specification

					New Huawei S5735S-L Series Switch S5735S-L24P4S-A 24 Ports POE Gigabit Switch With 4 x GE SFP ports
				

					CloudEngine S5735S-Lseries switches are a new compact gigabit access switch developed by huawei, which can provide flexible full gigabit access and fixed gigabit or gigabit uplink ports.

CloudEngine S5735S-L series switches based on a new generation of high-performance hardware and huawei company unified VRP (Versatile Routing Platform) software Platform, flexible Ethernet network, a variety of security control, etc, three layer Routing protocol, support for multiple have higher performance and more abundant business processing capacity, widely used in enterprises park access, gigabit to the desktop and various application scenarios.

1	Twenty-four PoE+ 10/100/1000BASE-T ports	2	Four 1000BASE-X ports Applicable modules: * GE optical module * GE-CWDM optical module * GE-DWDM optical module * GE copper module * 10GE SFP+ optical module (only used for stack connection, OSXD22N00 not supported, applicable in V200R019C10 and later versions) * 1 m and 3 m SFP+ high-speed copper cables (only used for stack connection, applicable in V200R019C10 and later versions) * 3 m and 10 m SFP+ AOC cables (only used for stack connection, applicable in V200R019C10 and later versions) * 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, applicable in V200R019C10 and later versions)
3	One console port	4	One ETH management port
5	One USB port	6	One PNP button NOTICE: To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.
7	Ground screw NOTE: It is used with a ground cable.	8	Jack for AC power cable locking strap NOTE: The AC power cable locking strap is not delivered with the switch.
9	AC socket NOTE: It is used with an AC power cable.	-	-

Item	Description
Memory (RAM)	1 GB
Flash	512 MB in total. To view the available flash memory size, run the display version command.
Service port surge protection	Common mode: Â±7 kV
Power supply surge protection	Â±6 kV in differential mode, Â±6 kV in common mode
Dimensions (H x W x D)	* Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.7 in.) * Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.)
Weight (with packaging)	4.31 kg (9. lb)
Stack ports	Any 10/100/1000BASE-T ports or 1000BASE-X ports (applicable in V200R019C10 and later versions)
PoE	Supported
Rated voltage range	* AC input: 100 V AC to 240 V AC, 50/60 Hz * High-Voltage DC input: 240 V DC
Maximum voltage range	* AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz * High-Voltage DC input: 190 V DC to 290 V DC
Maximum power consumption (100% throughput, full speed of fans)	* Not providing the PoE function: 53 W * 100% PoE loads: 451 W (PoE: 380 W)
Typical power consumption (30% of traffic load) * Tested according to ATIS standard * EEE enabled * No PoE power consumption	39 W

Previous： Huawei S5735S-S48T4S-A S5735S-L layers 3 Switch 48 Ports Gig...

next： Huawei S5735S-L24T4S-A S5735S-L Access Switch 24x 10/100/100...