1

Forty-eight 10/100/1000BASE-T ports

2

Four 1000BASE-X ports
Applicable modules: * GE optical module
* GE-CWDM optical module
* GE-DWDM optical module
* GE copper module
* 10GE SFP+ optical module (only used for stack connection, OSXD22N00 not supported, applicable in V200R019C10 and later versions)
* 1 m and 3 m SFP+ high-speed copper cables (only used for stack connection, applicable in V200R019C10 and
later versions)
* 3 m and 10 m SFP+ AOC cables (only used for stack connection, applicable in V200R019C10 and later versions)
* 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, applicable in V200R019C10 and later versions)

3

One console port

4

One ETH management port

5

One USB port

6

One PNP button
NOTICE: To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.
To reset the switch, press the button.
Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.

7

Ground screw
NOTE: It is used with a ground cable.

8

Power module slot 1
NOTE: Applicable power module:
* 60 W AC Power Module (PAC60S12-AR)
* 1000 W DC Power Module (PDC1000S12-DB)

9

Power module slot 2
NOTE: Applicable power module:
* 60 W AC Power Module (PAC60S12-AR)
* 1000 W DC Power Module (PDC1000S12-DB)

-

-

Item

Description

Memory (RAM)

1 GB

Flash

512 MB in total. To view the available flash memory size, run the display version command.

Service port surge protection

Common mode: ±7 kV

Power supply surge protection

* Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode
* Using DC power modules: ±2 kV in differential mode, ±4 kV in common mode

Dimensions (H x W x D)

* Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.)
* Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 43.6 mm x 442.0
mm x 444.2 mm (1.72 in. x 17.4 in. x 17.49 in.)

Weight (with packaging)

8.37 kg (18.45 lb)

Stack ports

Any 10/100/1000BASE-T ports or 1000BASE-X ports (applicable in V200R019C10 and later versions)

RTC

Supported

Rated voltage range

* AC input: 100 V AC to 240 V AC, 50/60 Hz
* High-Voltage DC input: 240 V DC
* DC input: -48 V DC to -60 V DC

Maximum voltage range

* AC input: 90 V AC to 264 V AC, 47 Hz to 63 Hz
* High-Voltage DC input: 190 V DC to 290 V DC
* DC input: -38.4 V DC to -72 V DC

Maximum power consumption (100% throughput, full speed of fans)

58 W

Typical power consumption (30% of traffic load) * Tested according to ATIS standard
* EEE enabled
* No PoE power consumption

41 W