1

Twenty-four 10/100/1000BASE-T ports

2

Four 1000BASE-X ports

3

One console port

4

One ETH management port

5

One USB port

6

One PNP button

NOTICE:

To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.

7

Ground screw

NOTE:

It is used with a ground cable.

8

Power module slot 1

NOTE:

Applicable power module:

· 60 W AC Power Module (PAC60S12-AR)

· 1000 W DC Power Module (PDC1000S12-DB)

9

Power module slot 2

NOTE:

Applicable power module:

· 60 W AC Power Module (PAC60S12-AR)

· 1000 W DC Power Module (PDC1000S12-DB)

-

-

Item

Description

Memory (RAM)

1 GB

Flash

512 MB in total. To view the available flash memory size, run the display version command.

Service port surge protection

Common mode: ±7 kV

Power supply surge protection

· Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode

· Using DC power modules: ±2 kV in differential mode, ±4 kV in common mode

Dimensions (H x W x D)

        · Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.)

        · Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 43.6 mm x 442.0 mm x 444.2 mm (1.72 in. x 17.4 in. x 17.49 in.)

Weight (with packaging)

7.89 kg (17.4 lb)

Stack ports

Any 10/100/1000BASE-T ports or 1000BASE-X ports (applicable in V200R019C10 and later versions)

RTC

Supported

RPS

Not supported

PoE

Not supported

Rated voltage range

· AC input: 100 V AC to 240 V AC, 50/60 Hz

· High-Voltage DC input: 240 V DC

· DC input: -48 V DC to -60 V DC

Maximum voltage range

· AC input: 90 V AC to 264 V AC, 47 Hz to 63 Hz

· High-Voltage DC input: 190 V DC to 290 V DC

· DC input: -38.4 V DC to -72 V DC

Maximum power consumption (100% throughput, full speed of fans)

44 W

Typical power consumption (30% of traffic load)

· Tested according to ATIS standard

· EEE enabled

· No PoE power consumption

29 W