1

Forty-eight PoE+ 10/100/1000BASE-T ports

2

Four 10GE SFP+ ports

Applicable modules and cables:

· GE optical module

· GE-CWDM optical module

· GE-DWDM optical module

· GE copper module (100M/1000M auto-sensing)

· 10GE SFP+ optical module (OSXD22N00 not supported)

· 10GE-CWDM optical module

· 10GE-DWDM optical module

· 1 m and 3 m SFP+ high-speed copper cables

· 3 m and 10 m SFP+ AOC cables

· 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, applicable in V200R019C10 and later versions)

3

One console port

4

One ETH management port

5

One USB port

6

One PNP button

NOTICE:

To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.

7

Ground screw

NOTE:

It is used with a ground cable.

8

Power module slot

NOTE:

Applicable power module: 1000 W AC PoE Power Module (PAC1000S56-CB)

Item

Description

Memory (RAM)

1 GB

Flash

512 MB in total. To view the available flash memory size, run the display version command.

Dimensions (H x W x D)           

            · Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.)

         Â· Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 43.6 mm x 442.0 mm x 444.2 mm (1.72 in. x 17.4 in. x 17.49 in.)

Weight (with packaging)

8.7 kg (19.18 lb)

Stack ports

Any 10/100/1000BASE-T ports or 10GE SFP+ ports (applicable in V200R019C10 and later versions)

RTC

Not supported

RPS

Not supported

PoE

Supported

Rated voltage range 

         Â· AC input: 100 V AC to 130 V AC, 200 V AC to 240 V AC, 50/60 Hz

         Â· High-Voltage DC input: 240 V DC

Maximum voltage range

        · AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz

         Â· High-Voltage DC input: 190 V DC to 290 V DC

Maximum power consumption (100% throughput, full speed of fans)

          · Not providing the PoE function: 80 W

          · 100% PoE loads: 914 W (PoE: 874 W)

Typical power consumption (30% of traffic load)

        · Tested according to ATIS standard

·       EEE enabled

         Â· No PoE power consumption

59 W